Vedio Home > video >

The purpose of the emergency stop switch is provided on the

Author:perfte    Updatetime:2019-11-21 15:44   

20t rail material cart has an atmospheric appearance, beautiful appearance, rust prevention, and a shelf life of 10 years. The surface of the paint shall be flat and bright, the film thickness shall be uniform, and there shall be no defects ......more>

The purpose of the emergency stop switch is provided on the rail material cart

20t rail material cart has an atmospheric appearance, beautiful appearance, rust prevention, and a shelf life of 10 years. The surface of the paint shall be flat and bright, the film thickness shall be uniform, and there shall be no defects such as leakage and leakage. The rail material cart runs smoothly, has flexible control, no clogging, no sliding, no oil leakage, no abnormal noise. All motors and mechanical parts must not be exposed and a shield should be added. The drum frame has the function of frequency conversion speed regulation, the speed is even when flipping, no trembling, no abnormal noise.
The rail material cart chassis travels as a flat track on the track, which is designed according to the standard 1500mm. When the equipment is running, an alarm should be configured to warn pedestrians or vehicles, and an emergency stop switch should be configured to install anti-collision rubber on both ends of the platform. Safety measures such as glue.
In order to ensure the service life of the electric flat battery pack, continuous operation for one charge is not less than 6 hours. The charging position of the chassis should be equipped with an automatic reel or toolbox. When the battery is fully charged, it can be used in a power receiving box or an automatic reel. The device meets the large load weight of ≥10T, with sufficient power and no slippage.
In addition to the metal structure, any faulty or damaged parts of the track car can be scrapped and replaced. The track plate should be discarded only if the main stress member of the metal structure is unstable or deformed beyond the standard and cannot be repaired. The destruction of the metal structure may not only cause casualties, but may also cause the electric vehicle to be scrapped in the entire vehicle. In addition, it affects the safety of the equipment or workpiece being transported.
Therefore, in the process of using the rail material cart, it is necessary to prevent damage caused by natural forces and control its load and working speed.